Page 1 of 1

wsm design

PostPosted: 09 May 2014, 16:13
by aldo
Had My wsm over a week now.just opened it Up to find a lot of water in bottom below charcoal grate.the cause of rain leaking in at lid.why have Weber not got a weep hole in bottom.
So you need to have a cover over it when wet. I have read this is a issue.what's the point if you can't display it.
Disappointed

Re: wsm design

PostPosted: 09 May 2014, 21:08
by Toby
Close the top vent and you won't have the problem

Re: wsm design

PostPosted: 09 May 2014, 21:45
by aldo
Top closed .that's why Weber supply cover with new purchase,
In My opinion.there is a issue with this. Read Into this online
.

Re: wsm design

PostPosted: 10 May 2014, 12:45
by Swindon_Ed
Mine has sat outside uncovered in all weather for the last 4 years and still looks fine. I don't use the cover for the WSM as i found it grows mould really quickly if using it.

Yes the bottom fills with water, but it's easy enough to pour the water away before loading it up with charcoal.

i don't use the cover for the WSM as i found it grows mould really quickly if using it

Re: wsm design

PostPosted: 10 May 2014, 14:04
by aldo
Thanks for your advice.