New toy 2

[esselle]

Anyone got any opinions on this stuff?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT

Cheers.

[Swindon_Ed]

I've used this stuff on an old VW camper a few years ago and it took all the surface rust off the chrome that had built up really well with just a couple of hours elbow grease.

But that was on an already polished surface, not sure how it would work on a non polished surface.

[esselle]

sprayed

[esselle]

thermometer back and plate back on ready to cook!

[esselle]

Does anyone have any ideas on this please? I thought it might work as a heat deflector sort of thingy? It sits in its own groove between the firebox and main chamber and is removable. It is lightweight and sort of honeycombe in construction, i would presume so that smoke and heat can get through. On my first seasoning smoke i left it in and went by the Cactus Jack temp gauge for temperatures and it sat at 230 perfectly. But when I put a maverick probe in that proved the cj gauge was way out and i couldn't get the pit above 220. So do you think this baffle thingy has some effect on that and if so should it be removed or it can be rotated slightly in it's groove to open up by differing amount the same way as an intake would?
Thanks in advance for any help.

[joker smoker]

have you tried measuring pit temps at both ends [i.e. with 2 probes simultaneously ] to ascertain if you've got equal temps. across the pit. if you have there's no problem letting the pit run at 220 if that's what it wants to do. you'll get great BBQ at these temps , it'll just take a little longer.

[esselle]

Will try that then.

[Vic.]

sprayed

looking silky smooth

[esselle]

Thanks Vic, We used her for her first catering job a few weeks ago and she turned a few heads.