BBQ Guru Party Q

Found any hotstuff that you want to tell people about, heres the place to do it!

Re: BBQ Guru Party Q

Postby essexsmoker » 27 Jun 2016, 09:12

I'm sure you will love it. Stokers really take the pain out of cooking.

I built my own. Not a complicated affair, but my the difference it makes. I had it for my UDS and the temp never varied by more than about 5C, if that.
essexsmoker
Rubbed and Ready
Rubbed and Ready
 
Posts: 1093
Joined: 31 May 2013, 18:32

Re: BBQ Guru Party Q

Postby sleepybones » 27 Jun 2016, 09:46

Sounds good. As I mentioned previously my WSM is fitted with Nomex Gaskets so, once the PartyQ is installed I hope to see very stable temps. Looking forward to trying to cook Short Ribs (had them at Bodeans on Saturday evening and loved them) :)
User avatar
sleepybones
Got Wood!
Got Wood!
 
Posts: 57
Joined: 18 Aug 2014, 08:09

Re: BBQ Guru Party Q

Postby essexsmoker » 27 Jun 2016, 13:47

Where did you get your nomex gaskets from?

You should get good stability with that fitted.

Short ribs are a doddle, so fatty and marbled you can't really go wrong.

Let us know how they go.
essexsmoker
Rubbed and Ready
Rubbed and Ready
 
Posts: 1093
Joined: 31 May 2013, 18:32

Re: BBQ Guru Party Q

Postby sleepybones » 28 Jun 2016, 13:41

essexsmoker wrote:Where did you get your nomex gaskets from?


Ordered the gasket via eb@y and had two reels shipped over from the US. Have also used the same gasket around the rim of the lid on my Mastertouch. Since installing I see a lot less smoke escaping where each of the sections connect and they certainly help stop air leaking in.

It's the self-adhesive type (before choosing I viewed a couple of online videos of installing the type that comes with a tube of glue, and opted for the less-messy approach).

Had an update email: Guru should arrive today. Was planning on roasting a leg of lamb on the kettle on Saturday but I might have to switch the menu to Baby-backs on the WSM so I can try out my new toy :)
User avatar
sleepybones
Got Wood!
Got Wood!
 
Posts: 57
Joined: 18 Aug 2014, 08:09

Re: BBQ Guru Party Q

Postby TakingtheBrisket » 28 Jun 2016, 20:01

essexsmoker wrote:Where did you get your nomex gaskets from?

You should get good stability with that fitted.

Short ribs are a doddle, so fatty and marbled you can't really go wrong.

Let us know how they go.


Wishbox usa do them too
User avatar
TakingtheBrisket
Got Wood!
Got Wood!
 
Posts: 230
Joined: 14 Jan 2014, 17:43

Re: BBQ Guru Party Q

Postby essexsmoker » 29 Jun 2016, 09:13

Thanks for replys.

Good luck with the lamb.
essexsmoker
Rubbed and Ready
Rubbed and Ready
 
Posts: 1093
Joined: 31 May 2013, 18:32

Re: BBQ Guru Party Q

Postby Bigpikle » 01 Jul 2016, 19:18

Very tempted by a PartyQ for my WSM as well, but also wondering at what point. GMG Davy Crockett starts to make more sense? I might get one and I guess I can also sell it on if I upgrade in future. Look forward to hearing how you get on.


Sent from my iPad using Tapatalk
User avatar
Bigpikle
Got Wood!
Got Wood!
 
Posts: 14
Joined: 05 Sep 2015, 14:00

Re: BBQ Guru Party Q

Postby sleepybones » 06 Aug 2016, 21:46

Update. have finally found time to use the Party Q. I really like it.

Temp swings over/under target were higher than people have described but i was only running a very small starting fire and limited unlit fuel (configured as a thick snake) because it was a ribs cook. I suspect the swings will be less pronounced with a bigger, more stable, fire as would be the case with my longer cooks.

Love the ease of it, looking forward to the next time I have a reason to throw a packer on :)
User avatar
sleepybones
Got Wood!
Got Wood!
 
Posts: 57
Joined: 18 Aug 2014, 08:09

Previous

Return to Product Reviews

Who is online

Users browsing this forum: No registered users and 1 guest

cron