First Smoke Successful - Now For Ribs
Posted: 04 May 2013, 13:41
So firstly thank you to everyone on here who has given advice, thanks to that and other tips picked up on the web I got my offset smoker up and running last weekend, with the baffle in place using some restaurant grade lumpwood charcoal (from Paraguay!!) which I bought at my local BBQ shop. I was going to do a dry run on temperatures only but as I was able to maintain temp of 220-250F fairly easily I bought a dirt cheap chicken from Tesco and threw it in (with no dry rub, prep or anything!) thinking if I ruin it so what. I used some of the cherry wood I got from Paul Goulden for smoke.
4hrs later the internal temp hit 175F the thermometer alarm went and it came out really moist and smoky, and was delicious. Here is a picture

You can really see the red smoke marks where the leg joins the breast.
So this weekend I am going to do some ribs, just picked these baby backs up from my local guy

I am going to cook for about 3hrs 30mns at 225F - does this sound right for ribs that size? (not going to use foil this time, simply because it's my first time doing ribs so I want to keep it simple).
I will post the results.
4hrs later the internal temp hit 175F the thermometer alarm went and it came out really moist and smoky, and was delicious. Here is a picture

You can really see the red smoke marks where the leg joins the breast.
So this weekend I am going to do some ribs, just picked these baby backs up from my local guy

I am going to cook for about 3hrs 30mns at 225F - does this sound right for ribs that size? (not going to use foil this time, simply because it's my first time doing ribs so I want to keep it simple).
I will post the results.