Just got a wsm and bought 3 bags of heat beads.
Says in operating manual lump charcoal and heat beads not recommended.
Why is that.
heat beads on a wsm
-
derekmiller
- Site Admin

- Posts: 642
- Joined: 02 May 2012, 12:20
- First Name: Derek
- Location: Cotton End, Beds
Re: heat beads on a wsm
Probably to get you to use their briquettes. I have used all three and not had a problem
-
ConorD
- Rubbed and Ready

- Posts: 590
- Joined: 19 Apr 2012, 18:50
- First Name: Conor Doyle
- Location: Wokingham, Berks
Re: heat beads on a wsm
Almost certainly they disagree with anything that is not their brand. I have used heat beads for over a year now and never had any issues.
- keith157
- Moderator

- Posts: 3816
- Joined: 05 Aug 2011, 13:35
- First Name: Keith
- Location: Stevenage, Herts
Re: heat beads on a wsm
Stick with heat beads
- JamsCowbell
- Got Wood!

- Posts: 138
- Joined: 15 Apr 2013, 10:00
- First Name: James
Re: heat beads on a wsm
I've been using BigK lump wood charcoal in my WSM with no problems, I wouldn't worry about which charcoal you put in it so much as the quantity you need for a good 14 hour cook 
Re: heat beads on a wsm
As others have said lump or any brand of briquettes will be fine. Restaurant grade lumpwood charcoal or heat beads are regarded as the best.
Re: heat beads on a wsm
Thanks for advice,thought that were
Good for it.used Weber's charcoal before but not heat beads.is there much difference in quality.
Good for it.used Weber's charcoal before but not heat beads.is there much difference in quality.