Maverick et732

Feel free to ask any questions, one of the experts will certainly respond, don't be afraid to ask anything, we were all beginners at some point.
Post Reply
slatts
Twisted Firestarter
Twisted Firestarter
Posts: 425
Joined: 17 Nov 2012, 08:22
First Name: Mark Slatter
Location: welwyn garden city

Maverick et732

Post by slatts »

Hi All

Not sure if this is the right place for this post but I need help and advice!!

I've had my Maverick ET732 for a couple of months now, used it about 5-6 times with no problems.
This morning I get up at 5am get the smoker fuelled and ready. pork shoulder was trimmed and rubbed last night so all ready to go but the receiver isn't showing the bbq temp.
I've changed the batteries, tried to re-sync it and turned it on and off loads of times. The receiver just will not show the bbq temp, the transmitter is showing the temp though.
I don't have the meat probe in but have used it this way before with no problems.

Is this a case of me needing to send it back, going to be a pain in the backside today if it doesn't work anymore or if there any other things I can try.
I did take the batteries out of the receiver while it was still on and it reset it but still no temps :x

Thanks for any info

Slatts
Swindon_Ed
Moderator
Moderator
Posts: 1265
Joined: 14 Aug 2010, 18:48
First Name: Ed Gash
Location: Swindon
Contact:

Re: Maverick et732

Post by Swindon_Ed »

Are you turning both parts on at the same time as i find that they don't connect easily if you turn them on one at a time.
slatts
Twisted Firestarter
Twisted Firestarter
Posts: 425
Joined: 17 Nov 2012, 08:22
First Name: Mark Slatter
Location: welwyn garden city

Re: Maverick et732

Post by slatts »

Hi

Yeah tried to get them on at the same time aswell as turning the units on separately??
I've emailed MacsBBQ but will probably have to wait till Monday now to get a reply.

Atleast its a lovely day here and it just means I'll have to sit in the garden for most of the day, there's also a fridge full of Magners in my garden so as frustrating as it is the unit not working properly its not all that bad :)
Swindon_Ed
Moderator
Moderator
Posts: 1265
Joined: 14 Aug 2010, 18:48
First Name: Ed Gash
Location: Swindon
Contact:

Re: Maverick et732

Post by Swindon_Ed »

I know your pain, i've had my temperature controller break on me this morning whilst both cookers were full with briskets, butts & ribs which i'm cooking for a catering job this afternoon!!!
User avatar
keith157
Moderator
Moderator
Posts: 3816
Joined: 05 Aug 2011, 13:35
First Name: Keith
Location: Stevenage, Herts

Re: Maverick et732

Post by keith157 »

Our prayers are with you both :D

And I thought I had a problem cause my piggie's too big for the rotisserie :oops:
slatts
Twisted Firestarter
Twisted Firestarter
Posts: 425
Joined: 17 Nov 2012, 08:22
First Name: Mark Slatter
Location: welwyn garden city

Re: Maverick et732

Post by slatts »

Hi Ed
It seems your problem is a bit worse than mine, hope its not to much trouble for you.
Thanks Keith, its been off for a while now but just turned it on and still doesn't work, pray harder people pray harder :lol:
Mine is nearly at the foiling stage so not to much trouble now and the temps are holding well.
slatts
Twisted Firestarter
Twisted Firestarter
Posts: 425
Joined: 17 Nov 2012, 08:22
First Name: Mark Slatter
Location: welwyn garden city

Re: Maverick et732

Post by slatts »

I now know your pain keith, just been to Bookers and got a box of ribs and they wouldnt fit in my freezer :lol:
I put the box in the fridge until I could separate them where the odd bit of plastic sheet was and put them in carrier bags, still struggled to fit them in :lol:

As I opened the fridge the Stubbs bbq sauce fell out and smashed on the ground so all in all a great day, this pulled pork better be good ;)
Swindon_Ed
Moderator
Moderator
Posts: 1265
Joined: 14 Aug 2010, 18:48
First Name: Ed Gash
Location: Swindon
Contact:

Re: Maverick et732

Post by Swindon_Ed »

slatts wrote:It seems your problem is a bit worse than mine, hope its not to much trouble for you.
Luckily i'd already wrapped the briskets and butt's, and I managed to get everything delivered with a product i was happy with and the customer was as well which is the main thing.

Sadly though it now means i need to ship the unit off to the US to get repaired and wait for it to come back, but i've got comp's and catering jobs over the next few weeks which means i'll need to get something else sorted in the short term :(
slatts
Twisted Firestarter
Twisted Firestarter
Posts: 425
Joined: 17 Nov 2012, 08:22
First Name: Mark Slatter
Location: welwyn garden city

Re: Maverick et732

Post by slatts »

I would say you could borrow my maverick Ed :D
Good luck with the comps and catering hope all goes well.

The pork was a success luckily so all good here and the magners are being opened now.
Have a good weekend all
slatts
Twisted Firestarter
Twisted Firestarter
Posts: 425
Joined: 17 Nov 2012, 08:22
First Name: Mark Slatter
Location: welwyn garden city

Re: Maverick et732

Post by slatts »

MACS BBQ Got in touch today, very happy with the response.

They are sending out a new Maverick ET732 today and I've got to send the old one back as soon as I can.
They emailed me back Saturday after I emailed them and called today to go through a few things, then they called me back as the boss (Ian) is in China but still took the time to deal with my problem.

I'm impressed with the customer service from them! :D
Post Reply