Unlit coals??

Feel free to ask any questions, one of the experts will certainly respond, don't be afraid to ask anything, we were all beginners at some point.
Bradders
Got Wood!
Got Wood!
Posts: 10
Joined: 24 May 2013, 12:58
First Name: David bradford
Location: Geordie Land

Unlit coals??

Post by Bradders »

WSM arrived on Monday and I have a pork shoulder and chicken planned for the weekend. Damn I'm impressed with the build quality.

Been doing more research and looked at the saucer method(off to B&Q). I also got Low and Slow(quite preachy I thought) and he says light new coals to go on it rather than putting in unlit coals through the door.

What are your thoughts?

Bradders.
User avatar
NomNomBBQ
Got Wood!
Got Wood!
Posts: 88
Joined: 20 May 2013, 11:00
First Name: Bryn Hardcastle

Re: Unlit coals??

Post by NomNomBBQ »

Hi Bradders,

We discussed how a few of us light coals on this page

http://bbbqs.com/Forum/viewtopic.php?f=18&t=3465

I only tip coals into the WSM when its empty or everything is wrapped as this kicks up a load of ash which you dont want on your food. A few times ive actually tipped a lit starter of coals into it using the door as a slide, this works pretty well. Ive also thrown a starter of coal in sideways, which worked but I wouldnt recommend it :lol:

I would say its worth doing a dummy run with your smoker, if only to gunk it up a bit. New BBQs seem to run very hot.

There is a link somewhere to how Slap yo Daddy Harry seasons his smoker but I cant find it now. Someone else might have it?
User avatar
keith157
Moderator
Moderator
Posts: 3816
Joined: 05 Aug 2011, 13:35
First Name: Keith
Location: Stevenage, Herts

Re: Unlit coals??

Post by keith157 »

I think it was on his website somewhere slapyodaddy.com
tommo666
Twisted Firestarter
Twisted Firestarter
Posts: 359
Joined: 09 Sep 2012, 13:11
First Name: Tom Steed
Location: Chelmsford, Essex

Re: Unlit coals??

Post by tommo666 »

I saw it on the weber site http://www.virtualweberbullet.com/seasoning.html but there must be further info out there.
User avatar
NomNomBBQ
Got Wood!
Got Wood!
Posts: 88
Joined: 20 May 2013, 11:00
First Name: Bryn Hardcastle

Re: Unlit coals??

Post by NomNomBBQ »

paulfire
Got Wood!
Got Wood!
Posts: 98
Joined: 12 May 2013, 23:29
First Name: paul
Location: Bolton, Lancashire

Re: Unlit coals??

Post by paulfire »

unless you dismantle the Q how else do you restock the fire during cooking ? I have tried it and the burns and scalds could have made me do the swearing dance. I think the door on your WSM (not jealous at all) is there for a purpose, one of which is to carefully put new fuel on your fire using tongs or in my case a long handled garden trowel. As to whether you use lit or unlit coals, how brave or burn resistant are you? I have enough scars thanks, unless I'm all wrong.
RobinC
Rubbed and Ready
Rubbed and Ready
Posts: 802
Joined: 21 Jan 2011, 10:11
First Name: Robin Candy
Location: Cheshire/Shropshire border

Re: Unlit coals??

Post by RobinC »

Generally I find if you are using briquettes there's no need to restock the fuel on a 47cm WSM. In the early days of owning a WSM when I did add lumpwood to it to be honest I found the position of the door very awkward to work with especially if you have the water pan in there. In those days I used to use a pair of welders gloves and do the hot squat which I'll freely admit is not the safest manoeuvre in the world.
User avatar
keith157
Moderator
Moderator
Posts: 3816
Joined: 05 Aug 2011, 13:35
First Name: Keith
Location: Stevenage, Herts

Re: Unlit coals??

Post by keith157 »

On his course Harry had a couple of WSM working from midnight to well past 2pm, a lot depends on what fuel you use, with heatbeads and a proper placement of lit and unlit coals, admittedly with a forced air system, both Harry & Toby were getting incredibly long burns. To date I've not had to top up my ProQ (so saying I've undoubtedly jinxed myself for the weekend :( ). A small coal shovel would work to dump unlit coals on the pyre though and the doors are smaller than on the WSM.
RobinC
Rubbed and Ready
Rubbed and Ready
Posts: 802
Joined: 21 Jan 2011, 10:11
First Name: Robin Candy
Location: Cheshire/Shropshire border

Re: Unlit coals??

Post by RobinC »

I can certainly get burn times of 14 - 16 hours in my 47 WSM with no forced draft system. Haven't tried for longer.
derekmiller
Site Admin
Site Admin
Posts: 642
Joined: 02 May 2012, 12:20
First Name: Derek
Location: Cotton End, Beds

Re: Unlit coals??

Post by derekmiller »

I am with Robin on this.
With two chimneys of unlit and one of lit, I can get 10-12hrs on my 57 WSM. This is ample for 8-10lb of brisket or pork.
Post Reply