Ahh ok, that's the kind of figures I was looking for. Thanks. I have a separate bag that I put the used coals in. I tend to use them for the grill.somapop wrote:
I've tented to use just over half a 5kg (so perhaps 3kg) per long cook, but I tend to have a fair bit leftover (once all valves are closed the UDS soon snuffs out). I'm really placing coals two layers thick with the centre free for the hot coals.
For a smaller wash drum, the perhaps three layers would be required.
As mentioned above, you can afford to be generous as once shut down the unused coals will be good to go next time.
Be interested to know if you get away with one coat from a 250ml tin of paint...
When you long cook, you mean 6hr or a looong cook? 13hr?
Paint has dried now, onky first coat. It is VERY shiny! I guess being the first coat you can still see the brush strokes. Having said that I did rush it and use a really cheapo stiff and well used brush. If you have a fine soft one and take your time it would probably be much better.
Over all I think it will protect it much better than the other stuff and rain and dirt will come off the shiny surface much easier.
I personally prefer the matt finish but practically and durability wise I think it's the best choice.
!